Huck 245 Riveter ?Rivet Gun DESCRIPTION
The Model 245 tool is sized for high-speed production applications, up to 20 fastener installations per minute. This tool can install fasteners up to 3/8″ steel HuckBolts, with optimum stroke for one-cycle installations. A versatile tool, the Model 245 features an eccentric (Offset) pull piston, allowing for better center to edge clearance. Plated piston rods in the Model 245 extend the life of the seals. The 245 is factory-tested for 2000 cycles, ensuring a high level of reliability. Despite its outstanding production capacity, the Model 245 weighs only 8.80 pounds.
SPECIFICATIONS FOR 245
Specifications shown in this document may be subject to change which may be introduced after publication. For the latest information always consult Alcoa Fastening Systems.
- Weight of 245: 8.8 lbs (4 kgs)
- Air Pressure: 90 – 100 psi (620 – 690 kPa)
- Stroke : .625″ (15,9 mm)
- Pull Force @ 90 psi: 7750 lbs (34 474N)
- Speed 30 cycles / minute
- Noise Level: 85 dbA at 90 psi
PULLING HEADS (NOSE ASSEMBLIES)
Pulling Heads are not furnished with riveter and must be ordered separately.
HUCK® INTERACTIVE CD ROM : NOSE ASSEMBLY TABLE
245
Some Fasteners & Nose assemblies for use with the 245 Tool
Type Diameter Nose Assembly
- BOM 4.8 mm (3/16″) 99-1053
- 6.4 mm (1/4″) 99-830-1
- MAGNA-LOK 9.5 mm (3/8″) 99-3318
- MAGNA-BULB 7.9 mm (5/16″) 99-3307
- C6L/C120L 4.8 mm (3/16″) 99-2558, 99-2559
- 6.4 mm (1/4″) 99-2564, 99-2565
- 7.9 mm (5/16″) 99-99-245
- 9.5 mm (3/8″)* 99-100-245, 99-100-1D2
- MAGNA-GRIP 4.8 mm (3/16″) 99-3206
- 6.4 mm (1/4″) 99-3207
- 7.9 mm (5/16″) 99-1439
- 9.5 mm (3/8″)* 99-1440
- HUCKTAINER 9.5 mm (3/8″) 99-3438
Items in * Aluminium Only
bold are part of our FOCUS Tooling Range
