Express Business to Business Delivery
Express Business to Business Delivery
CALL FOR PRICING
GT250-8.000 Solid Carbide Drill Reamer 8.00 mm dia x 95 mm
GT 250 Kevlar Drill (patent pending) cutting geometry has been vigorously used on all types of Kevlar material, including armour manufacture and has proven in all cases to be the best cutting action for both the material and the operator.
Fluff free finish, minimal volcano effect leads to hours saved in producing a quality holes in Kevlar materials.
The GT 250 Kevlar Drill has the same qualities as a scythe gathering the fibres inwards to be severed leaving minimal fluff.
Two flute style for diameters up to 12mm and a new (patent pending) 3 flute version is available for larger diameters.
| Metric Sizes | |||
| Part No | Diameter mm | Length mm | Flute mm |
| GT250-2.500 | 2.500 | 95.000 | 25.000 |
| GT250-3.000 | 3.000 | 95.000 | 25.000 |
| GT250-3.250 | 3.250 | 95.000 | 25.000 |
| GT250-4.000 | 4.000 | 95.000 | 30.000 |
| GT250-4.850 | 4.850 | 95.000 | 30.000 |
| GT250-5.000 | 5.000 | 95.000 | 30.000 |
| GT250-5.500 | 5.500 | 95.000 | 30.000 |
| GT250-6.000 | 6.000 | 95.000 | 35.000 |
| GT250-6.500 | 6.500 | 95.000 | 35.000 |
| GT250-7.000 | 7.000 | 95.000 | 35.000 |
| GT250-7.500 | 7.500 | 95.000 | 35.000 |
| GT250-8.000 | 8.000 | 95.000 | 40.000 |
| GT250-8.500 | 8.500 | 95.000 | 40.000 |
| GT250-9.000 | 9.000 | 95.000 | 40.000 |
| GT250-10.000 | 10.000 | 95.000 | 40.000 |
There are no questions yet. Be the first to ask a question about this product.
AP TOOLS LIMITED:
Unit 8 Mitchell Point
Ensign Way, Hamble
Southampton, Hampshire
SO31 4RF, UK
© APtools Ltd . All Rights Reserved. – Website Designed by Akira Studio Ltd