Cherry Aerospace H84-8CLA Straight Rivet Gun – Riveter pulling head -8 (1/4″) Nose Assembly for G84 rivet gun CherryMax AB & Cherylock A

DIMENSIONAL DATA

(all measurements in Inches, see PDF)
 Tool Weight (without riveter):.3 Lbs (0.14 Kg)

CHOICE OF RIVETERS
 G84 Riveters

MOUNTING INSTRUCTIONS
 Attach Riveter to air source for correct piston positioning.
 Make sure the Jaws and all internal components of the Collet are properly located
 Thread the Collet onto the Piston of the riveter
 Push on the Bayonet mount system and snap in the Sleeve.
 Cycle the tool to make sure it is functional.

BEFORE USE, CHECK IF:
 The Pulling Head is correctly mounted and the proper riveter is selected.
 Proper Air source is connected (see Riveter specification for recommended pressure).
 The appropriate Nose Piece is used and the tool is clean and in good working condition.

USAGE
 This tool was designed to install “-8” diameter CherryLock “A” code fasteners.
 This tool is also capable of installing “-8” diameter CherryMax “AB”, Aluminium.

DURING OPERATION
 Inspect the active area of the Nosepiece regularly.
 Keep the tool clean, especially the Nosepiece and Jaws; pay special attention when used with sealants and adhesives.
 If stem slippage occurs, the Jaws need to be either cleaned or replaced.