(see parts list on PDF) • Attach Riveter to air source for correct piston positioning. • Insert the spring into the riveter’s head piston. • Place the jaws inside the collet. • Place the bomber over the jaw follower and place this assembly into the collet against jaws. • Tighten securely, using a wrench. • Thread sleeve snugly into end of head cylinder; tighten securely with the jam nut. • Cycle the tool to make sure it is functional.
BEFORE USE, CHECK IF: • The Pulling Head is correctly mounted and the proper riveter is selected. • Proper Air source is connected (see Riveter specification for recommended pressure). • The appropriate Nose Piece is used and the tool is clean and in good working condition. USAGE • This tool was designed to install A code type Cherrylock blind fasteners; order the right part number for the fastener diameter to install ( -3, -4, -5 or -6 diameter, see table on next page). • Due to limitations in riveter power and stroke, some grip lengths may need double triggering the riveter and the longer grips may need a different riveter to install. Please refer to the individual tool specification for capacity.
DURING OPERATION • Inspect the front active area of the Nosepiece regularly; replace when worn. • Keep the tool clean, especially the Nosepiece and Jaws; pay special attention when used with sealants and adhesives. • If stem slippage occurs, clean or replace the internal jaws.
Pulling Head
Type
Adaptor
Rivet
Rivet dia
Maximum Grip
H955-4
Straight
680B46
CherryLOCK’A’
1/8″
see power tool Chart
Questions and answers from customers on this product
There are no questions yet. Be the first to ask a question about this product.
