Cherry Aerospace Rivet Gun – Riveter H9015-6C 3/16″ Countersunk Cherry 9000 Pulling Head

Cherry Aerospace Rivet Gun – Riveter H9015-6C 3/16″ Countersunk Cherry 9000 Pulling Head

H9015-6C Pulling Head

1. CHOICE OFRIVETERS
   These heads fit directly on the G902-15 Cherry® power riveter.
   They also fit directly on older Cherry power riveters such as the G715A.
   Will fit on the CherryMAX® riveters (G704B, G746A and G74) with the 704A9 adapter.
   BEFORE USE, CHECK IF:
   The Pulling Head is correctly mounted and the proper riveter is selected.
   Proper Air source is connected (see Riveter specification for recommended pressure).
   The appropriate Nose Piece is used and the tool is clean and in good working condition.
   USAGE
   3/32”, 1/8”, 5/32” AND 3/16” CHERRY® rivets, 9000 series.
2.  The Countersunk version of the H9015 Series will install both flush and universal head rivets.
   DURING OPERATION
   Inspect the active area of the Nosepiece regularly.
   Keep the tool clean, especially the Nosepiece and Jaws; pay special attention when used with
   sealants and adhesives.
   If stem slippage occurs, the Jaws need to be either cleaned or replaced.