Cherry Aerospace Rivet Gun – Riveter H9040-8C 1/4″ Cherry 9000 Pulling Head Nose Assembly

Cherry Aerospace Rivet Gun – Riveter H9040-8C 1/4″ Cherry 9000 Pulling Head Nose Assembly

CHOICE OF RIVETERS
• These heads fit directly on the G740A Cherry® power riveter.
• Will fit on the CherryMAX® riveters (G704B, G746A and G747) with the 704A6 adapter.
• Will fit on G784 with the 680B57 adapter.

MOUNTING INSTRUCTIONS
• Attach riveter to air source for correct piston positioning.
• Make sure the jaws and all internal components of the collet are properly located; see parts list.

BEFORE USE, CHECK:
• The pulling head is correctly mounted and the proper riveter is selected.
• Proper air source is connected (see riveter specification for recommended pressure).
• The tool is clean and in good working condition.
USAGE  ¼” CHERRY® rivets, 9000 series.
• The countersunk version of the H9040 series will install both flush and universal head rivets.
DURING OPERATION
• Inspect the active area of the nose piece regularly.
• Keep the tool clean, especially the nose piece and jaws; pay special attention when used with
sealants and adhesives.
• If stem slippage occurs, the jaws need to be either cleaned or replaced.