Cherry Rivet Gun – Riveter H681-6C Countersunk Pulling Head – Nose Assembly for 3/16″ – 6 (NAS 1097) (MS 20426)

Cherry Rivet Gun – Riveter H681-6C Countersunk Pulling Head – Nose Assembly for 3/16″ – 6 (NAS 1097) (MS 20426)

Cherry Rivet Gun – Riveter H681-6C Countersunk Pulling Head – Nose Assembly (NAS 1097) (MS 20426)
br />H681-6C Countersunk Head (MS 20426 )
A separate pulling head is required for each diameter CherryLock® rivet.
It is acceptable that countersunk (C) pulling heads be used for installing both universal and counter-sunk head CherryLock® rivets.
These heads fit directly on all Cherry Hydro-shift Riveters.

AVAILABLE EXTENSIONS
H681 pulling heads may he obtained in four extended lengths to reach into difficult access areas.
These are 2″, 6″, 12″ & 24″ extensions additional to the normal head length of 2 13/16″.
To order extension heads, specify correct pulling head number from the chart and add extension length required.
Example:

• H681-6C-E2 for 2”
• H681-6C-E12 for 12”

Nose assy fits G784 Riveter