Huck 2012 Rivet Gun
DESCRIPTION
The Model 2012 series are lightweight, high speed production tools using Huck standard nose assemblies designed to install: -04 through -06 dia. UNIMATIC® blind rivets and blind bolts along with ASP® and TI-MATIC fasteners. The Model 2012 is available with a vacuum system and bottle using a pneumatic-hydraulic intensifier system powered by 90 psi air pressure.
SPECIFICATIONS FOR 2012
Specifications shown in this document may be subject to change which may be introduced after publication. For the latest information always consult Alcoa Fastening Systems.
- Weight of 2012: 4.4 lbs (2,1 kgs)
- Weight of 2012B & 2012V: 4.7 lbs (2,2 kgs)
- Air Pressure: 90 – 100 psi (620 – 690 kPa
- Air Consumption: 2.9 CFM (0,0014m3/s) based on 20 fastener installations/minute
- Min. Stroke : .650″ (16,5 mm)
- Min. Pull Force @ 90 psi: 2670 lbs (11 877N)
- Noise Level: 85 dbA Maximum at 90 psi
PULLING HEADS
Pulling Heads are not furnished with riveter and must be ordered separately.
| Pulling heads for UNIMATIC® Blind Rivets without Drive washer |
| Diameter | Straight,
Short | Straight,
Medium | Straight,
Long |
| 1/8 | 99-2724 | 99-2725 | 99-2726 |
| 5/32 | 99-2730 | 99-2731 | 99-2732 |
| 3/16 | 99-2736 | 99-2737 | 99-2738 |
Pulling heads for UNIMATIC® Blind Rivets with Drive washer
(diameters -4, -5, 6 are installed with a single pulling head) |
Straight,
Standard Length | Straight, Long | Offset | 90 deg
angle |
| 99-3458-202 | 99-3459-202 | 99-3466 | 99-3467 |
| Pulling heads for UNIMATIC® Blind Bolts without Drive washer |
| Diameter | Straight,
Short | Straight,
Medium | Straight,
Long |
| 5/32 | 99-2700 | 99-2701 | 99-2702 |
| 3/16 | 99-2706 | 99-2707 | 99-2708 |
